Remote Monitoring

777 MRSW

The 777 Manual Remote Reset Kit allows the 777 line of motor and pump protection products to be manually reset without opening the panel door. Simply connect the 9-pin adapter

Show More

  • Product Literature
    • Electrical Characteristics
      • Catalog # 777-575-HRG-P2
      • Input
        Voltage (V)         500 to 600VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 20A (looped conductors only); 20 - 90A direct
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J6 0 L00 - L60 or Off
      • Overcurrent Trip Point 2 - 100 Amps with proper looping
      • Address COM: C00 - C07; RS-485: A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (1 - 10A) … MULT or OFF
      • Ground Fault Trip Delay (s) 0s (default)
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 10_ operations at rated load; Mechanical: 1 x 10_
      • Maximum Input Power 10W
      • CT Ratio 1-10
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 451 - 660V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 0 - 500s; Undercurrent: 0 - 500s A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40o to 80oC (-40o to 176oF)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (standard)
      • Undercurrent Trip Point 0 1 - 98 Amps with proper looping
      • Undervoltage Trip Voltage 450 - 649V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-575-LR-P2
      • Input
        Voltage (V)         500 to 600VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 1 - 9A 10 - 800A (external CTs required)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J6 0 L00 - L60 or Off
      • Overcurrent Trip Point (2 - 100A) … MULT of 80 - 140% of CT primary
      • Address COM: C00 - C07; RS-485: A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (0.3 - 2.0A) … MULT or 60% of primary CT or OFF
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 2 25 50 75 100 150 200 300 400 500 600 700 800
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 172 - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (standard)
      • Undercurrent Trip Point (0 1 - 9.8 Amps) … MULT or 40 - 140% of CT primary
      • Undervoltage Trip Voltage 170 - 524V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-575-P2
      • Input
        Voltage (V)         500 to 600VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 20A (looped conductors required); 20 - 80A (direct); 90 - 800A (external CTs required)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J6 0 L00 - L60 or Off
      • Overcurrent Trip Point (20A - 100A) … MULT of 80 - 140% of CT primary
      • Address A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (3 - 20A) … MULT or 12 - 40% of primary CT or OFF
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 10 100 150 200 300 400 500 600 700 800
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 451 - 660V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (standard)
      • Undercurrent Trip Point (0 10 - 98 Amps) … MULT or 40 - 140% of CT primary
      • Undervoltage Trip Voltage 450 - 649V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-575-TS
      • Obsolete: 2020 -09-21
      • Input
        Voltage (V)         500 to 600VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 25A 3 phase (loops required); 25 - 90A 3 phase (direct); 80 - 800A 3 phase (external CTs)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 5 J5 10 J10 15 J15 20 J20 30 J30
      • Overcurrent Trip Point (20A - 100A) … MULT of 80 - 120% of CT primary
      • Address A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Delay (s) % over setpoint / Trip time: 1% / 30s; 2% / 15s; 3% / 10s; 4% / 7.5s; 5% / 6s; 6% / 5s; 10% / 3s; 15% / 2s
      • Current Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (3 - 20A) … MULT or 10 - 30% of primary CT or OFF
      • Ground Fault Trip Delay (s) % of setpoint / Trip time: 101 - 200% / 8s ± 1s; 30s; 201 - 300% / 4s ± 1s; 301 - 400% / 3s ± 1s; 401%+ / 2s ± 1s
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 10 conductors or 100 - 800 ratio
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) LV setting - 600V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 2 - 500s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults: 2 - 500m; # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) 5% ±1s
      • Undercurrent Trip Delay (s) 2 - 60s
      • Undercurrent Trip Point (0 10 - 98 Amps) … MULT or 40 - 140% of CT primary
      • Undervoltage Trip Voltage 450V - HV setting
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 15% or 999
      • Catalog # 777-ACCUPOWER
      • Input
        Voltage (V)         190 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 25A 3 phase (loops required); 25 - 90A 3 phase (direct); 80 - 800A 3 phase (external CTs)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 5 J5 10 J10 15 J15 20 J20 30 J30
      • Overcurrent Trip Point (20A - 100A) … MULT of 80 - 140% of CT primary
      • Address A01 - A99 or OP1
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Delay (s) % over setpoint / Trip time: 1% / 30s; 2% / 15s; 3% / 10s; 4% / 7.5s; 5% / 6s; 6% / 5s; 10% / 3s; 15% / 2s
      • Current Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 2 - 500s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range 2 - 500m or A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) 5% ±1s
      • Voltage Accuracy (%) ±1%
      • Catalog # 777-FT
      • Input
        Voltage (V)         200 - 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 25A 3 phase (loops required); 25 - 90A 3 phase (direct); 80 - 800A 3 phase (external CTs)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Point (20A - 100A) … MULT of 80 - 120% of CT primary
      • Address A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Delay (s) % over setpoint / Trip time: 1% / 30s; 2% / 15s; 3% / 10s; 4% / 7.5s; 5% / 6s; 6% / 5s; 10% / 3s; 15% / 2s
      • Current Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (3 - 20A) … MULT or 10 - 30% of primary CT or OFF
      • Ground Fault Trip Delay (s) % of setpoint / Trip time: 101 - 200% / 8s ± 1s; 30s; 201 - 300% / 4s ± 1s; 301 - 400% / 3s ± 1s; 401%+ / 2s ± 1s
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 10 conductors or 100 - 800 ratio
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) LV setting - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 10kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) 5% ±1s
      • Undercurrent Trip Delay (s) 2 - 60s
      • Undercurrent Trip Point (0 10 - 98 Amps) … MULT or 40 - 100% of CT primary
      • Undervoltage Trip Voltage 170V - HV setting
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 15% or 999
      • Catalog # 777-HRG-P2
      • Input
        Voltage (V)         200 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 20A (looped conductors required); 20 - 90A (direct)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J60 L00 - L60 or OFF
      • Overcurrent Trip Point 2 - 100A with proper looping
      • Address COM: C00 - C07; RS485: A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (1 - 10A) … MULT or OFF
      • Ground Fault Trip Delay (s) 0s (default)
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 10 conductors
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 172 - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (standard)
      • Undercurrent Trip Point 0 10 - 98 Amps with proper looping
      • Undervoltage Trip Voltage 170 - 524V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-HVR-LR-P2
      • Input
        Voltage (V)         340 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 1 - 9A (direct); 10 - 800A (with external CTs)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J60 L00 - L60 or OFF
      • Overcurrent Trip Point (2A - 10A) … MULT of 80 - 140% of CT primary
      • Address COM: C00 - C07; RS485: A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (0.3 - 2.0A) … MULT or 6 - 40% of CT primary or OFF
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 2 25 50 75 100 150 200 300 400 500 600 700 800
      • Output Load Rating (VA) Pilot Duty: 470VA @ 600VAC B600; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 341 - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (standard)
      • Undercurrent Trip Point (0 0.1 - 9.8 Amps) … MULT or 40 - 100% of CT primary
      • Undervoltage Trip Voltage 340 - 523V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-HVR-P2
      • Input
        Voltage (V)         340 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 20A (looped conductors required); 20 - 90A (direct); 90 - 800A (external CTs required)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J60 L00 - L60 or OFF
      • Overcurrent Trip Point (20A - 100A) … MULT of 80 - 140% of CT primary
      • Address COM: C00 - C07; RS485: A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (3 - 20A) … MULT or 12 - 40% of CT primary or OFF
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 10 100 150 200 300 400 500 600 700 800
      • Output Load Rating (VA) Pilot Duty: 470VA @ 600VAC B600; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 341 - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (standard)
      • Undercurrent Trip Point (0 10 - 98 Amps) … MULT or 40 - 140% of CT primary
      • Undervoltage Trip Voltage 340 - 523V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-LR-HRG-P2
      • Obsolete: 2020 -09-21
      • Input
        Voltage (V)         200 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 10 - 800A (external CTs required external zero-seq. CT required)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J60 L00 - L60 or OFF
      • Overcurrent Trip Point 172 - 528V
      • Address COM: C00 - C07; RS485: A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) 1 - 10A or OFF
      • Ground Fault Trip Delay (s) 0s (default)
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 25 50 75 100 150 200 300 400 500 600 700 800
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 10 - 999A proper looping of the CTs is required
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (default)
      • Undercurrent Trip Point 0 5 - 999A proper looping of the CTs is required
      • Undervoltage Trip Voltage 170 - 524V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-LR-P2
      • Input
        Voltage (V)         200 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 1 - 9A 10 - 800A (with external CTs)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J60 L00 - L60 or OFF
      • Overcurrent Trip Point (2A - 10A) … MULT of 80 - 140% of CT primary
      • Address COM: C00 - C07; RS485: A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (0.3 - 2.0A) … MULT or 60% of CT primary or OFF
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 2 25 50 75 100 150 200 300 400 500 600 700 800
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 172 - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (default)
      • Undercurrent Trip Point (0 1.0 - 9.8 Amps) … MULT or 40 - 140% of CT primary
      • Undervoltage Trip Voltage 170 - 524V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-LR-TS
      • Input
        Voltage (V)         200 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 1 - 4.5A 3 phase (loops required); 2 - 9A 3 phase (direct)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 5 J5 10 J10 15 J15 20 J20 30 J30
      • Overcurrent Trip Point (2A - 10A) … MULT
      • Address A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Delay (s) % over setpoint / Trip time: 1% / 30s; 2% / 15s; 3% / 10s; 4% / 7.5s; 5% / 6s; 6% / 5s; 10% / 3s; 15% / 2s
      • Current Unbalance Trip Point (%) 2 - 25% or 999
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (0.3 - 2.0A) … MULT or 10 - 30% or OFF
      • Ground Fault Trip Delay (s) % of setpoint / Trip time: 101 - 200% / 8s ± 1s; 30s; 201 - 300% / 4s ± 1s; 301 - 400% / 3s ± 1s; 401%+ / 2s ± 1s
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 10 conductors or 100 - 800 ratio
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) LV setting - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 2 - 500s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults: 2 - 500m; # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) 5% ±1s
      • Undercurrent Trip Delay (s) 2 - 60s
      • Undercurrent Trip Point (0 1 - 9.8 Amps) … MULT
      • Undervoltage Trip Voltage 170V - HV setting
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 15% or 999
      • Catalog # 777-MV-P2
      • Input
        Voltage (V)         100 to 240VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 10 - 800A (external CTs required)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J60 L00 - L60 or OFF
      • Overcurrent Trip Point 80 - 140% of CT primary
      • Address COM: C00 - C07; RS485: A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) 6 - 40% of CT primary or OFF
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 25 50 75 100 150 200 300 400 500 600 700 800
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 86 - 264V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (default)
      • Undercurrent Trip Point 40 - 140% of CT primary
      • Undervoltage Trip Voltage 85 - 262V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-P2
      • Input
        Voltage (V)         200 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 20A (looped conductors required); 20 - 90A (direct); 80 - 800A (external CTs required)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 60 J02 - J60 L00 - L60 or OFF
      • Overcurrent Trip Point (20A - 100A) … MULT of 80 - 140% of CT primary
      • Address A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (3 - 20A) … MULT or 12 - 40% of CT primary or OFF
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 172 - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 999s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) ±0.5s
      • Undercurrent Trip Delay (s) 2 - 999s (default)
      • Undercurrent Trip Point (0 10 - 98 Amps) … MULT or 40 - 140% of CT primary
      • Undervoltage Trip Voltage 170 - 524V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Catalog # 777-TS
      • Input
        Voltage (V)         200 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 25A 3 phase (loops required); 25 - 90A 3 phase (direct); 80 - 800A 3 phase (external CTs)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 5 J5 10 J10 15 J15 20 J20 30 J30
      • Overcurrent Trip Point (20A - 100A) … MULT of 80 - 120% of CT primary
      • Address A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Delay (s) % over setpoint / Trip time: 1% / 30s; 2% / 15s; 3% / 10s; 4% / 7.5s; 5% / 6s; 6% / 5s; 10% / 3s; 15% / 2s
      • Current Unbalance Trip Point (%) 2 - 25% or 999
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (3 - 20A) … MULT or 10 - 30% of primary CT or OFF
      • Ground Fault Trip Delay (s) % of setpoint / Trip time: 101 - 200% / 8s ± 1s; 30s; 201 - 300% / 4s ± 1s; 301 - 400% / 3s ± 1s; 401%+ / 2s ± 1s
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 10 conductors or 100 - 800 ratio
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) LV setting - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 2 - 500s
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults: 2 - 500m; # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) 5% ±1s
      • Undercurrent Trip Delay (s) 2 - 60s
      • Undercurrent Trip Point (0 10 - 98 Amps) … MULT or 40 - 140% of CT primary
      • Undervoltage Trip Voltage 170V - HV setting
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 15% or 999
      • Catalog # 777VA-02
      • Obsolete: 2020 -09-21
      • Input
        Voltage (V)         200 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 25A (looped conductors required); 25 - 90A (direct); 80 - 800A (external CTs required)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 30 J02 - J30 L00 - L60 or OFF
      • Overcurrent Trip Point (20A - 100A) … MULT of 80 - 140% of CT primary
      • Address A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 25% or 999
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (3 - 20A) … MULT or 12 - 80% of primary CT or OFF
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 10 100 150 200 300 400 500 600 700 800
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 172 - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 2 - 500m
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults: 2 - 500m; # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) 5% ±1s
      • Undercurrent Trip Delay (s) 2 - 255m (standard)
      • Undercurrent Trip Point (0 10 - 98 Amps) … MULT or 40 - 140% of CT primary
      • Undervoltage Trip Voltage 170 - 524V
      • Voltage Accuracy (%) ±1%
      • Voltage Unbalance Trip Point (%) 2 - 15% or 999
      • Catalog # 777VA-03
      • Obsolete: 2020 -09-21
      • Input
        Voltage (V)         200 to 480VAC
      • Output
        Form         SPDT - Form C
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Full Load Amp Range (A) 2 - 25A (looped conductors required); 25 - 90A (direct); 80 - 800A (external CTs required)
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
      • Overcurrent Trip Class 02 - 30 J02 - J30 L00 - L60 or OFF
      • Overcurrent Trip Point (20A - 100A) … MULT of 80 - 140% of CT primary
      • Address A01 - A99
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Ground Fault Accuracy (%) ±15%
      • Ground Fault Current Trip Point (A) (3 - 20A) … MULT or 12 - 80% of primary CT or OFF
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Maximum Input Power 10W
      • CT Ratio 1 - 10 100 150 200 300 400 500 600 700 800
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Overvoltage Trip Voltage (%) 172 - 528V
      • Pollution Degree 3
      • Protection Class IP20
      • Rapid Cycle Timer (s) 0 - 500s (standard)
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Restart Delay Range All faults: 2 - 500m; # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Timing Accuracy (%) 5% ±1s
      • Undercurrent Trip Delay (s) 2 - 255s (standard)
      • Undercurrent Trip Point (0 10 - 98 Amps) … MULT or 40 - 140% of CT primary
      • Undervoltage Trip Voltage 170 - 524V
      • Voltage Accuracy (%) ±1%