777 MRSW

777-HRG-P2

The 777 Manual Remote Reset Kit allows the 777 line of motor and pump protection products to be manually reset without opening the panel door. Simply connect the 9-pin adapter

Show More

  • Product Literature
    • Electrical Characteristics
      • Catalog # 777-HRG-P2
      • Input Voltage (V) 200 to 480VAC
      • Maximum Input Power 10W
      • Output Form SPDT - Form C
      • Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
      • Full Load Amp Range (A) 2 - 20A (looped conductors required); 20 - 90A (direct)
      • Timing Accuracy (%) ±0.5s
      • Rapid Cycle Timer (s) 0 - 999s
      • Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
      • Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
      • Overvoltage Trip Voltage (%) 172 - 528V
      • Undervoltage Trip Voltage 170 - 524V
      • Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
      • Voltage Accuracy (%) ±1%
      • Overcurrent Trip Point 2 - 100A with proper looping
      • Overcurrent Trip Class 02 - 60 J02 - J60 L00 - L60 or OFF
      • Undercurrent Trip Point 0 10 - 98 Amps with proper looping
      • Undercurrent Trip Delay (s) 2 - 999s (standard)
      • Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
      • Current Accuracy (%) ±3% (<100 amps direct)
      • Ground Fault Current Trip Point (A) (1 - 10A) … MULT or OFF
      • Ground Fault Trip Delay (s) 0s (default)
      • Ground Fault Accuracy (%) ±15%
      • Sensor Hole Size Max conductor size: 0.65 in (with insulation)
      • Short Circuit (kA) 100kA
      • Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
      • Protection Class IP20
      • Pollution Degree 3
      • CT Ratio 1 - 10 conductors
      • Address COM: C00 - C07; RS485: A01 - A99
      • Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
      • Termination Type Torque: 7in-lbs
      • Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
      • Operating Temperature -20° to 70°C (-4° to 158°F)
      • Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
      • Humidity 10-95% non-condensing per IEC 68-2-3
      • Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
      • Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)